How to Target Different Rooms of the Home with Radiant Heating
Estimated Arrival: Between Dec 03 and Dec 05. *ETA to USA Only
Shipping & Returns: Free Shipping with orders over $100
Say goodbye to foggy mirrors with a WarmlyYours ClearlyYou™ Mirror Defogger. This 15” round mirror defogger gently heats the mirror's surface, preventing moisture from forming while you bathe or shower. With a self-adhesive backing, your ClearlyYou™ Mirror Defogger can be attached to any wall-hung mirror in just minutes. It operates at a constant temperature of 104 degrees, using only a minimal amount of energy. Use the pre-attached power leads to conveniently connect to your bathroom's 120V lighting circuit. Not suitable for installation in the shower.
- 24/7 installation support and lifetime technical support
- ClearlyYou™ Mirror Defoggers are available in a variety of shapes and sizes
- Same Day Shipping
- cUlus listed
- 1-year warranty against defects in materials and workmanship
|Warranty||1-year warranty against defects in materials and workmanship||1-year warranty against defects in materials and workmanship||1-year warranty against defects in materials and workmanship|
|cULus listed components||cULus listed components||cULus listed components|
|Ingress Protection (IPxx) Rating||IP44|
|Backing||Self-adhesive backing allows direct application to the back of any wall-hung mirror in just minutes||Self-adhesive backing allows direct application to the back of any wall-hung mirror in just minutes||Self-adhesive backing allows direct application to the back of any wall-hung mirror in just minutes|
|Size||15" x 15"||
20" x 20"
||25" x 25"|
|Coverage||1 sqft||-||4 sqft|
|Length||1.3 in||1.8 in||2′1″|
|Thickness||0.02 in||0.02 in||0.02 in|
|Width||1.3 in||1.8 in||2′1 in|
|Weight||0.3 lbs||0.35 lbs||0.55 lbs|
|Amps||0.17 A||0.31 A||0.51 A|
|Ohms||627 Ohm||351 Ohm||217 Ohm|
|Voltage||120 VAC||120 VAC||120 VAC|
|Watts||19 W||34 W||56 W|
|BTU Per Hour||65||116||191|
104 F / 40 C
|104 F / 40 C||104 F / 40 C|
Documents & Manuals
Please see WarmlyYours® Warranty Policy Here: Warranty Registration.
Shipping and Return Policy
Please see our Shipping Policy Here: Shipping and Return Policy
Yes, but please make sure not to overlap multiple heating elements over each other.
Yes. In fact, this is the most common way to operate a mirror defogger.
Installing a heating system behind your mirror is the most reliable way to avoid a foggy mirror. Typically, mirrors fog up because they are much cooler than the steam in a bathroom after a shower or bath. The cool surface of the mirror causes the moisture in the steam to condensate in the form of fog. A heated mirror will prevent this condensation by being as warm, or warmer, than the steam.
A mirror defogger cold lead is 36 inches long.
An ultra thin electric heating mat is attached to the back of the mirror, which transmits gentle warmth across a mirror’s surface to prevent moisture from condensing on the mirror's surface during a shower or bath.
If you're gluing a mirror to a wall, simply apply adhesive to the mirror backing, not covered with the mirror defogger.
The mirror defogger will begin to defog the mirror within 5 minutes of operation.
No. Mirror defoggers are designed to be mounted and wired to a fixed, wall-mounted mirror.
The electrical junction box should be installed inline with the Mirror Defogger’s lead wires and box. The box at the back of the defogger is meant to be located over the electrical box in the wall. This way it will be in the electrical box and not interfere with the defogger being flush with the mirror and the wall. The location where the wires leave must be entirely within the area of the new electrical junction box.
The mirror defoggers are not designed for use with dimmer switches or with any low-voltage control.
Electric-resistance heating cables and systems have no polarity. This includes all current WarmlyYours heating elements.
No. Mirror defoggers can't be trimmed and the proper size needs to be selected to fit on an open, unobstructed area on the back of the mirror.
No. Mirror defoggers are not rated to be installed in wet locations like a shower enclosure.